Price:

£755.00

This machine MUST be used with an OIL FREE compressor (see our Bambi PT15)

1. PRO-SET AIR FILTER
Connect the air filter to the Pro-set by loosening the side cover screw and sliding the bracket onto the screw.RE-TIGHTEN screw.
Find the black hose 139mm(5 1/2”).Connect one end to the air input quick connect fitting on the back of the machine and the other end to the straight quick connect fitting.
Connect the air compressor hose to the 90°quick connect fitting or the barbed fitting supplied.
NOTICE: This machine requires clean, dry oil-free air. We suggest using an oil free compressor. If your compressor is an oil type, you MUST have an oil removal filter, coalescing type(#004-579 or equivalent),in the air supply line to this machine. If you are unsure of this requirement.

2. PRO-SET FOOT THROTTLE
Connect the foot throttle hose to the throttle connection on the back of the machine.

3. PRO-SET IMPACT HANDPIECE
Connect the hand piece hose to the hand piece quick connect fitting.

4. HANDPIECE TUNING
Set the stroke per minute(A) to 2300.Set the main air regulator knob(B) to 0.1-0.4 BA R(2-5PSI).
Hold the hand piece you have selected to use vertically, tool holder end up, next to your ear. Without depressing the foot throttle or palm control, slowly increase the air pressure until the hand piece begins to buzz. Continue to increase the air pressure until the hand piece vibrates and knocks. Slowly add air pressure until the knocking stops and 2 psi (.13 bar ).This is the perfect air pressure for each hand piece. Now you are free to move the SPM (strokes per minute ) dial to whatever setting desired

Weight 7.6 kg

There are no reviews yet.

Be the first to review “Pro-Set Engraver/Setter Helper.”